Our products
innovative entry level spa pack platform
Main features and specification summary
Main feature summary:
In.xe's cable bay was designed to ease wire insertion. Its terminal bloc has more room to insert wires. Tighter input connection reduces heat generated for increased component lifetime.
Only serviceable parts, terminal bloc, fuses, heater and probe connectors, are made accessible to service technicians. Electronic components are protected in separate and inaccessible compartments.
In.seal provides extra level of protection against water infiltration. Connectors and power box are designed to be watertight and no water can be in direct contact with electrical components. (IPX5)
Totally waterproof, in.link plugs and connectors are designed to ensure that all cables of equipment used to make a spa work properly are well connected at their intended connection port, eliminating any risk of mis-wiring.
In.flo is an all-electronic dry-fire protection of in.xe's heat.wav heater. In.flo eliminates the burden of adjustments, calibrations and failures associated to usual water flow sensors.
In.xe design includes in.kin, a contactor that protects spas and spa users against water overheat. In.kin is the industry's first and only true kinetic heat protection because it monitors all pump outputs, not just the "heating" pump.
In.xe also monitors water temperature through in.t.cip, our breakthrough software algorithm that calculates optimal time to start pumps and get water temperature readings.
In.stik is another cool in.xe feature, a pen drive software auto-uploader with an in.link connector. In.stik connects to in.xe and contains software to program or configure its system. In.xe executes the data upload and update automatically.
Specifications review:
in.xe UL/CSA electrical specifications
Or:
(2 lines required with neutral) 48 A Max,
120 VAC nominal only (+ 5/- 10%)
single line with neutral) 16 A Max,
60Hz nominal (+ 1. 5 / -1.0 Hz).
Output ratings:
Out 1
Out 2
Out 3
Out 4
Out 5
L1
CO
C1
120/240V
120/240V
240V
120/240V
120/240V
120/240V
12VAC
20 FLA/70 LRA (in-rush)
15 FLA/60 LRA (in-rush)
15 FLA/60 LRA (in-rush)
10 A
6 FLA/10 A
10 A (always ON)
1 A
Pump 1 High Speed
Pump 1 Low Speed
Pump 2
(CP)/Blower
Ozone Generator
Audio/Video device
Light
Tub side controller
heat.wav ratings:
Current:
Flow rate:
17A resistive (4 kW at 240V)
8.5 A resistive (1kW at 120v)
Minimum of 18 GPM is required
in.xe.ce TUV electrical specifications
Or:
(2-phase system) 20 A Max per phase
230 VAC nominal (+ 5/- 10 %)
(single-phase system) 40 A Max
50 Hz nominal (+ 1. 5 / -1.0 Hz)
Output ratings:
Out 1
Out 2
Out 3
Out 4
Out 5
L1
CO
C1
230V
230V
230V
230V
230V
12VAC
15 FLA/60 LRA (in-rush)
15 FLA/60 LRA (in-rush)
6 FLA/10 A
6 FLA/10 A
10 A (always ON)
1 A
Pump 1 Hi & Low
Pump 2
(CP)/Blower
Ozone Generator
Audio/Video device
Light
Tub side controller
heat.wav ratings:
Current:
Flow rate:
8.7 A resistive (2kW at 230v)
5.7 A resistive (1.3 kW at 230v)
16.5 A resistive (3.8 kW at 230v)
Minimum of 18 GPM is required
Environmental:
Operating temperature (*)
North American model in.xe:
0°C (32°F) to 60°C (140°F) for Pump 1 up to 15 A
0°C (32°F) to 50°C (122°F) for Pump 1 up to 20 A
European model in.xe.ce:
for single-phase system (32 A Max) or 2-phase (2 x 16 A)
0°C (32°F) to 60°C (140°F)
for single-phase system (40 A Max) or 2-phase (2 x 20 A)
0°C (32°F) to 50°C (122°F)
(*Controller must be installed under the spa skirt)
Storage temperature: -25°C (-13°F) to 85°C (185°F)
Humidity: up to 85% RH, non condensing
Mechanical:
Weight: 4.76 kg (10.5 lbs)
Dimensions (W x H x D):
Chassis: 441.5x298.5 x129 mm (17.38" x 11.75" x 5.1")
UL/CSA Standards:
UL 1563 Fifth Ed.
UL File: E182156
CSA No. 22.2 - 218.1-M89.
TUV Standards:
EN/IEC 60335 - 2 - 60: 2003/2002 - EN/IEC 60335 - 1: 2002/2001
(incl. Corr. & Am. up to 2004)
EN55014-1
EN55014-2
EN61000-3-2
EN61000-3-3
The in.xe.ce is lab tested to IPx5 enclosure protection levels.
Keypads available for the in.xe:
in.k200 (LED display, 4 keys, 7 light indicators)
in.k219 (LED display, 4 keys, 7 function icons)
in.k235 (LED display, 6 keys, 8 function icons)
in.k400 (LCD display, 6 keys, 10 function icons)
in.k450 (LCD display, 6 keys, 10 function icons)
Interface connections:
communication link (in.stick or in.watch)